Be wary of guerrillas cutting corners and using gadgets to “slaughter” owners

[Teach you a trick]

Medium-term payment time is pre-agreed

Early in the interim period, we must pay attention to its motives. Just a few days after the start of the work, the workers always said that they had to enter the material. There was no money, and the medium-term project had already arrived, urging the owners to pay the interim payments. Normally decorated workers will not do so, but the hapless "home improvement guerrillas" often use this trick.

Experts: When signing a contract, it is best to limit the foreman through money. This has been repeatedly proven to be the most effective. Moreover, what links and standards should be provided for what money should be provided so as to avoid mutual ambiguity. The proportion of payment is best based on the proportion of 3,331, so that even if there are problems, it can be stopped in time.

Buying gadgets also requires receipt

"Home guerrillas" will always find you at the scene and send you to buy it, which is a little cheaper. In fact, many parts are counted in the project section. The decoration foreman suffers from no opportunity to slaughter the owner. Once there is an opportunity, especially when the owner purchases the contracted materials, he will always give you a list. The wire is not enough. It takes 2 wooden lines, etc. Because the sub-secondary, so the owners also feel that the money is not too much, returning accounts is not enough meaning, especially male owners, generally do not account.

Expert: "Home guerrillas" will not be stupid enough to allow owners to take advantage of him, but they will definitely take advantage of the opportunity to take advantage of the loopholes, so despite the loss of such small parts, the money is not much, but the purchase is to buy , The account is still to be considered clear, encounter the foreman who loves to dip cheap, it is best to leave an invoice or receipt after each purchase, to avoid being difficult to open, hard to argue.

Renovation Trick-Keeping Decoration Trap Duplex Decoration Paint Home Decorating Design Switch Paint Kitchen Sliding Door Kitchen Doors Bathroom Sliding Doors Bathroom Tiles Bathroom Doors Bathroom Ceiling Material Bathroom Ceilings Whole Bathroom Toilet Design Toilet Waterproof Bathroom Tiles Tiles Specifications Kitchen Tiles Balcony Tiles ld Tiles

40W Glue Guns Features:

1. Versatile

2. Easy

3. Quick

4. Proective Nozzle Cover

5. Trigger Flow Control

6. Bonds instantly

7. High quality

8. High temperature or low temperature

9. New design

10. With switch function

11. Big power

12. Industrial use

Idea for many applications. Fastening various materials such as paper, cardboard, fabric,wood, lace,trims,leather,metal,glass, tiles, rubber, ceramics and flooring etc.Ideal for hobby and household repair,DIY&craft projects.

Designed and manufactured to the highest of standards to ensure a robust and long life, we hope it provides you with many years of trouble-free, safe and reliable service.

General Safety Information:

1. Check if the plug cord was in good condition, and if there is stand before plug into the electrical outlet ; Check if the used glue gun has glue flow through back of the tunnel;

2. wait 5-10 minutes to allow glue to soften, stand up the glue gun on the table when not in use;

3. Touch nozzle to any clean, dry surface you wish to bond, to avoid any impurity stop the nozzle;

4. If the glue could not flow from the nozzle when the glue gun start to work, check if the glue gun are heating;

If glue gun can not be heated, there are following reasons:
1 Plug cord into electrical outlet not properly;
2 Glue gun has been destroyed owing to inner cord short circuit;

If glue gun can be heated, there are following reasons: Nozzle has been stopped by any impurity, ask careerman to manage it.

5. Do not use the glue gun under moist climate, humidity will affect insulation and cause electric shock;

6. Do not touch the nozzle or melted glue;

7. Do not remove out the melted glue stick from the tunnel back side, it will damaged the glue gun as well as scalding person hands.

8. Do not to disassemble or assemble any glue gun accessories freely, it will cause glue gun do not work properly;

9. Keep out of reach of children and stocked it beyond any of Children palpable side;

10. Only used for melting glue stick, no other usage;

11. When in use, there are any glue flow back from tunnel, stop using immediately, wait for careerman clean the glue;

12. Close the power if the glue gun not in use after 15 minutes;

Using methods

1. Glue gun using voltage is 110-220V AC,50/60Hz;

2. Tip gun forward on stand and place a piece of cardboard under the nozzle

3. Use 7-8mm (mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticks through
tunnel at back of gun

4. After power, wait for 5-10 minutes to allow glue to soften

Professional Glue Gun

Professional Glue Gun, 40W Glue Guns, Silicone Glue Gun, Hot Melt Glue Gun

Ningbo Kingvos Electrical Appliance Co.,Ltd , http://www.kingvos.com