How to take the wall painting steps
The wall paint is a means to make the wall become very smooth and smooth. It can also make the whole room become more beautiful, so the wall paint is indispensable in the decoration, then how to take the wall paint step? ? What are the techniques for painting on the wall ? Next, let's learn about it together with this website Xiaobian.
First, how to walk the paint step
Wall paint step 1, ready to brush tools
Wall paint needs to prepare soft brush, bucket, sandpaper, pen, roller brush, sun lamp, fan, rag, spray gun and so on.
Wall paint step 2, wall repair
In order to avoid emptying, falling off, sanding, and powdering of the brushed wall, repair the wall before brushing. It is necessary to smooth the unevenness of the grass and the bottom of the pothole. No matter whether it is in the horizontal direction or the vertical direction, it needs to be flattened before it can be putty.
Wall paint step 3, putty
The purpose of scraping putty is to make the wall more smooth and flat, because the putty itself will be more delicate, and the base layer can be modified and filled. Only need to buy finished bagged putty powder, according to the requirements of adding water, stirring can be painted on the wall.
Wall painting steps 4, wall grinding
After scraping putty, there will still be some uneven state, this time need to use sandpaper to improve the wall of a polished, repair, it is best to be more accurate by hand, after polishing can be used to check the flatness of the sun light , For the uneven place to continue polishing refine.
Wall paint step 5, paint latex paint
To this step is the real sense of the wall paint, latex paint brushing construction can choose brush brush, stick brush, spray gun, batch and other four methods, of which the brush is the most provincial material, but more time-consuming, Belong to slow work. Common effects of all kinds of stick brushes are also a waste of latex paint, but the cost is higher. The spray gun is effective and fast, but it is not easy to repair. Although the effect of the batch is best, it is also the most unexpected.
Second, the wall paint what skills
1, the wall paint need to shovel the original wall surface
This is to prevent blistering, detachment, etc. Scratching the old wall can make the paint stronger. Can scraper, iron brush to remove the original paint film, and then use sandpaper to polish the surface, use a sponge or rag to clean the wall surface, to enhance the adhesion of the new paint film.
2, do alkaline and moisture test
When finishing a new wall, the moisture content and alkalinity test of the wall should be well tested. The moisture content tester and pH test paper can be used to test. The wall surface is alkaline and the moisture content is too high to be suitable for wall painting work. After construction, proceed with construction.
3, to ensure ventilation and insulation
This is to make the wall paint dry and film as soon as possible, especially in the winter, the outdoor temperature is relatively low, it is easy to affect the film effect of the wall paint, while the ventilation also pay attention to insulation.
Edit Summary: The above is how to go about painting walls step and wall painting has introduced what skills, hoping to share the contents of the small series can help to you, if you want to learn more related knowledge, we can focus on this Website decoration information.
Wall paint
PP Pressing Faucet,Pressing Type Faucet,Pp Pressing Type Faucet,Pressing Type Plastic Faucet
Cixi Ruisheng Electric Appliance Factory , https://www.rswatertap.com