N08031 C-276 Alloy31 Nickel Plate

2018-08-02 10:03:34
Model NO.: N08031
Special Use: Cutting Tools, Measuring Tools, Cutters in Common Steel, High-strength Steel Plate, Wear Resistant Steel
Stock: Stock
Grade Number: a
Ts (MPa): 650
Yield RP0.2 (MPa): 276
Elongation: 40
Customized: Yes
Certificate: ISO2000
Delivery Time: 7-20
Trademark: taixie
Transport Package: Wooden Box
Specification: Nickel
Origin: China
HS Code: 7507120000
N08031 C-276 alloy31 nickel plate
Key Specifications/Special Features:
Introduction:
Alloy 31 is an iron-nickel-chromium-molybdenum alloy with nitrogen addition
It has a pitting resistance in high chloride environments between those of super-austenitic stainless steels and nickel alloys
Alloy has very good corrosion resistance in mixed acid and high chloride environments
Material is approved in ISO 15156/NACE MR0175 to test level VI for sour gas service
Typical applications:
Control lines
Control and instrumentation tubes
Heat exchangers
Chemical processing
Oil and gas
Typical wire chemistry:
C: 0.0015
Mo: 6-7
N: 0.2
Cr: 26-28
Ni: 30-32
Mn: 2
Si: 0.3
P: 0.02
Cu: 1.2
S: 0.01
Fe: Bal
Introduction
Inconel 625 is a Nickel-Chromium-Molybdenum alloy with excellent corrosion resistance in a wide range of corrosive media, being especially resistant to pitting and crevice corrosion. It is a favourable choice for sea water applications.
Chemical Composition of Inconel 625
The compositional range for Inconel 625 is provided in the table below.
Element Content
Ni 58% min
Cr 20 - 23%
Mo 8 - 10%
Nb+Ta 3.15 - 4.15%
Fe 5% max
Typical Properties of Inconel 625
Typical properties of Inconel 625 are covered in the following table.
Property Metric Imperial
Density 8.44 g/cm3 0.305 lb/in3
Melting point 1350 °C 2460 °F
Co-Efficient of Expansion 12.8 μm/m.°C
(20-100°C)		 7.1x10-6 in/in.°F
(70-212°F)
Modulus of rigidity 79 kN/mm2 11458 ksi
Modulus of elasticity 205.8 kN/mm2 29849 ksi
Properties of Supplied Materials and Heat Treated Materials
Condition of Supply Heat Treatment (After Forming)
Annealed/Spring Temper Stress relieve at 260 - 370°C (500 - 700°F) for 30 - 60 minutes and air cool.
Condition Approx Tensile Strength Approx Service Temp.
Annealed 800 - 1000 N/mm2 116 - 145 ksi -200 to +340°C -330 to +645°F
Spring Temper 1300 - 1600 N/mm2 189 - 232 ksi up to +200°C up to +395°F
Relevant Standards
Inconel 625 is covered by the following standards:
•         BS 3076 NA 21
•         ASTM B446
•         AMS 5666
Equivalent Materials
Inconel 625 is the tradename of Special Metals Group of Companies and equivalent to:
•         W.NR 2.4856
•         UNS N06625
•         AWS 012
Applications of Inconel 625
Inconel 625 typically finds application in:
•         Marine
•         Aerospace industries
•         Chemical processing
 
•         Pollution control equipment
Company information:

Phone:+8613400008153
Tel: 0510-88222973
Fax: 0510-88222975
 
Web: www.chinataixie.com
Add:No.22, Xinfeng Road, Xinwu District, Wuxi, Jiangsu, China.
Over 16 years of specialist experience in Copper, Mould steel, steel alloy! Welcome to order and customized.
 

White masterbatch

It was selected high-quality rutile type through a unique process refined.It has perfect whiteness, strong shading power, good dispersity, high plastic grease, good universal property,and so on. It was saled with reasonable price.and widely used in blowing film, pipe, injection molding, blowing bottle, wire drawing, casting, foaming, sheet and other plastic products industry.It is suitable for plastics raw material, such as PE, PP, PP, PVC, EVAPS, ABS, etc. Titanium dioxide content: 30- 70%

Universal White Masterbatch Granules

Universal White Masterbatch Granules,White Film Masterbatch Granules,White Board Masterbatch Granules,White Wire Masterbatch Granules

Cai Jian Plastic Product Co., Ltd. , http://www.caijianmasterbatch.com