What if the owner doesn't get a gas stove?

Everyone should have a fairly good understanding of some of the issues that frequently arise with gas stoves. The common problem is that gas stoves can't ignite. Don't rush to meet repairs and repairs. You should find out why the gas stoves aren't working. On fire, let's analyze how the boss gas stove can't get on fire .

The reason why the owner's gas stove could not be set on fire

First of all, we must know why the gas stove can't get fire. The reason may be:

1. The pulse igniter has no battery; the gas source switch is not open or the air pressure is insufficient;

2. Ignition electrode, improper sensing electrode distance or contamination; air pressure too high causing air flow too fast, impact spark;

3, the ignition nozzle is too large, the nozzle is too large resulting in too much air flow, impact spark; broken bread head, causing near-firing in the damaged parts;

4, aging piezoelectric ceramics; ignition output cable is not firmly connected with the porcelain head; output cable is damaged, causing ultra-close ignition;

5. The internal impact block of the switch process is worn or broken; the micro-switch of the pulse ignition process is in poor contact; there is a spider web in the ignition nozzle or in the ignition bracket; the hose is crimped or blocked.

If the gas stove is not on fire, it should be checked as follows: First, check whether the air supply switch is in the open state, if it is in the open state; secondly, check whether the connecting hose is folded flat or Pressing and bending, if it is not folded or bent, then check whether the battery has no electricity. If it is timely to replace the battery, finally, pick up the pan support to see if there is a fire at the ignition nozzle.

What if the owner doesn't get a gas stove?

First, if you do not catch fire, see if the discharge needle discharges

1, if the discharge needle does not discharge, indicating that the discharge needle failure, should replace the discharge needle.

2, if the discharge needle discharge, indicating that the valve body failure, should replace the valve body.

Second, how to do if the fire

1. If it can be burned normally, it means that the position of the igniter is too high. The user should be instructed to gently press the igniter down a few times, and then put on the support bracket.

2. If a fire is used, but the flame is too weak to reach the burner, the gas pressure is too low. The user of the liquefied gas stove recommends that he replace the new pressure reducing valve. The coal gas and natural gas should be reported to the gas supply company.

3, if the fire, and the flame can reach the fire lid, but it is not fire, indicating that the valve body is blocked, guide the user to use fine wire to clear the nozzle.

Above about the boss how to do not get on the gas stove to do a simple introduction to here, and hope to help you. For more information, please visit this website. Stay tuned.

Boss gas stove

Carbon Steel Seamless Steel Pipe

Carbon steel pipe , seamless steel pipe,Carbon steel seamless steel pipe

Shandong Xinsuju Steel Co.,Ltd. , https://www.sawlpipe.com