You can't just keep in mind the stylish and beautifully decorated bathroom

In the home improvement, kitchen and bathroom are the focus of renovation. It is true that some homes are neglected for the sake of fashion and beautiful decoration. Especially in the bathroom, if it is too slippery, it may cause danger. Therefore, we must consider the safety of the bathroom during the renovation.

New Alcoa Shower Room      Nine animal husbandry leading     Opu Yuba

Bathrooms and bathrooms are places where people wash away dust, eliminate fatigue and relieve stress, so people attach great importance to its comfort and safety. In addition to high-quality appliances, it is necessary to pay attention to smallpox, tiles, doors and windows. .

Threshold: It is a barrier that prevents water from overflowing from the bathroom. Therefore, there is a certain degree of inclination to use the lintel and the inside of the bathroom during the renovation so that water can flow into the bathroom.

Tile laying: The laying of tiles shall retain a slope of 1% of the discharge, with the slope facing the surface of the water. Floor tile joints should be uniform in thickness, aligned with wall tiles, and should be leveled when tiles are attached. If it meets the outlet of the water supply pipeline, the incision needs water when the tiles are tiled so that the flange cover on the water supply bronze can cover the cuts. So as not to break to ensure that there is no stagnant water

Installation of exhaust fans: Most people only install an exhaust fan. The bad gas in the bathroom cannot be discharged from the room and only circulates in the bathroom. The correct ventilation design should be to set up an exhaust pipe between the pipes to connect with the exhaust fan. The exhaust fan must have a retrograde gate to prevent the dirty gas from flowing back into the room. China Real Estate Trading Service Website

The installation of toilets: The traditional installation toilets are mostly fixed with cement slurry, so that the toilets cannot be disassembled and disassembled. When they encounter severe obstruction, only knock them out. A good method is to first install a flange piece on the toilet seat foot board, then install an expansion screw, and then use oil mud to surround the toilet water outlet, align the mounting hole of the toilet seat foot with the expansion screw, rotate it in a balanced manner, and tighten it with screws. Grout plug toilet and floor clearance.

Ceilings and doors: to choose waterproof rust-proof and anti-corrosion materials as well, the door installation should not use wooden doors to prevent future moisture deformation, try to use waterproof doors as appropriate, such as plastic, aluminum products.

>>> Renovation of small-sized second-hand housing Cleverly loaded 54 flat mix fine pink nest

Bathroom Decoration Company Entrance Decoration Bathroom Interior Decor Home Decoration Home Windows Floor Tiles Kitchen Wall Tiles Bathroom Tiles Bathroom Doors Fashion Small Bathroom Wall Tiles Bathroom Exhaust Fans Bathroom Design Toilet Waterproof Bathroom Tiles Floor Tiles Kitchen Tiles

Cold Stamping Coupler& Machine

Cold Stamping Coupler,Rebar Coupler ,Threaded Coupling ,Reinforcement Couplers

Metal Forging Machinery Co., Ltd. , http://www.nbthreadmachine.com