[Asian Reuters pump cartridge pumps by the pump top type cartridge, pump, inlet valve, discharge means, the intake line, the automatic control system, the exhaust valve and other components. Xiao Bian today and we introduce the characteristics of the next warehouse pump and the selection of key points. A warehouse-type pump 1, the characteristics of warehouse pump 1, warehouse pump with a long distance, flexible pipe layout, saving equipment investment and other characteristics of horizontal and vertical conveyor can be transported over a distance of more than 1,000 meters. 2, warehouse pump delivery capacity, Taiwan production reached 100 tons. 3, the control system has a high degree of automation, automatic loading, conveying operation, easy to operate. Automatic measurement, counting and display, alarm. 4, the control system with gas, pump top silo material gasification and other gas does not need another gas source, the pipeline directly from the intake manifold bleed air. 5, good sealing, reliable operation, less wearing parts, easy maintenance. Second, the main points of selection of warehouse pump Warehouse pump working time is divided into feeding time and delivery time: for a single warehouse pump, the feed time for the pump waiting time, so the feeding time is shorter, relative to The longer the delivery time, the shorter the feeding time and delivery time, the more the pump is delivered per hour and the greater the delivery capacity at the time of delivery. For the double warehouse pump, normal work, the feeding time should be shorter than the delivery time, so that one pump is in the feed, the other pump at the delivery time, two pumps alternately, saving some of the feed time, Therefore, double warehouse pump production than single high. Further Reading: pump valve pipe fittings Exhibition Water Expo Xiamen exhibition of marine equipment Internet + Forum Yiwu Fair 2016 exhibition mold top ten brands of the Internet information industry (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / WeChat:) http://beng.liuti.cn/ (Service Hotline:)
Floor Deck Roll Forming Machine are widely used in building: the steel-structured large scale warehouses, plants, supermarkets, shopping malls, trade markets, stadiums, holiday villages, sanatoriums, hotels, villas, residences, and different kinds of green houses.Floor Deck Roll Forming Machine, this type Steel floor plate is of simple shapes, high wave-degree and high strength. When installed, it can be directly mixed with the welded steel mesh and concrete with good adhesion, Applied in high-rise steel buildings, it can save the steel molding templates, and also reduce the floor load. Under the same load capacity, it can reduce the amount of steel to achieve cost-saving. Features and application: It produced steel floor board for the floor panel of high rise building, with high wave crest and strength, high degree of automation and low cost.
Rolling Speed: About 8-12m/min(not include cutting time)
Rolling Thickness: 0.3mm-1.5mm
Shaft Diameter: 75mm
Roller Stations: About 14-18 stations
Roller Material: 45# steel
Raw Material: Color painted coils
Cutting(Blade) Material: Cr12 Mold Steel
Motor Power: 5.5KW(Depend On Final Design)
Hydraulic Station: 4KW
Dimension: 8000X1500X1300(mm)
Total Weight: 5T
Equipment List
1 Decoiler
2 Feeding Device
3 Main Forming Machine
4 Hydraulic Step Press Device
5 Hydraulic Cutting Device
6 Hydraulic Station
7 PLC Computer Control System
8 Output Table
Floor Deck Roll Forming Machine
Floor Deck Roll Forming Machine,Steel Structural Floor Deck Roll Forming Machine,Metal Floor Deck Roll Forming Machine,Floor Decking Roll Forming Machine
HEBEI HANMAC MACHINE CO., LTD. , https://www.chinahanmac.com