Squat pan flush tank too small solution Squat pan flush tank size

Many squat toilet flushes use squat toilet flush tanks . In the process of flushing water tanks with squatting pans, we sometimes find that squat toilet flush tanks are too small to flush squat toilets. Many people will encounter this kind of situation. Of course, it is certainly very depressing to see such a situation when the net is not clean. In fact, flushing the toilet flush tank is too small to have a solution, then the squatting pan flush tank What if the water is too small? Today, with a small series to look at the squat flush tank flushing solution is too small and the size of the squatting flush tank for your reference oh.

First, the toilet flush tank flush is too small solution

1. The water outlet of the tank is blocked by other components or the opening is not complete, check it;

2. Something in the water pipe is blocked or obstructed, or there is a bend and the water flow is not smooth;

3, water valve switch is not suitable, open incomplete or open too slowly, if it is the cable is not too long;

  

4. Whether the tank water level is set too low and the water is too low; raise the water level;

Second, the size of the squatting flush tank

According to the type is divided into high water tank, low water tank. According to the installation method is divided into: wall-mounted, sitting box type, hidden type. According to the material can be divided into ceramic water tanks and fiberglass tanks. For the size of the squatting tank, we use the low water tank as an example. Its inlet hole diameter is generally 25mm or 29mm, and the diameter of the drainage hole is 65mm or 81mm.

  

The vertical distance from the effective working water level of the squatting tank to the overflow mouth should be no more than 38mm; the critical water level of the inlet valve should be higher than the overflow level, and its vertical distance should not be less than 25mm; the non-invasive water tank of the squatting tank should not be used. The lowest position of the seal should be higher than the overflow level, and the vertical distance should not be less than 5mm.

  

Summary: Today, people who install squat toilets are not that much. In public toilets, there are still many squat toilets. After reading this article, everyone has a certain understanding of the flushing of the toilets and how to solve this problem. The problem is also based on different circumstances to analyze. The relevant information about the flushing tank for squatting toilets was introduced here for everyone. I hope this article will be helpful to everyone. If you still have something you don't understand, you can leave a message to Xiaobian at the bottom. We will answer your questions as soon as possible.

Water tank squatting toilet toilet squatting toilet or squatting toilet toilet tank leaking water squat toilet block how to do

We can supply all kinds of Tarpaulin Components,  such as aluminum eyelets (grommets), PP ropes, stainless hooks, elastic ties, black plastic bars, rivets, PC eyelets, D-rings, PE webbings, etc. All the components can be used to process ready-made PE Tarpaulin Sheet. PE Tarpaulin components help people use tarpaulin in a easy way. When people use tarpaulin to cover things, they use eyelets, hooks or D-rings, etc to fasten, to protect the underthings in a good condition. PP rope and black plastic bar make the tarpaulin more strong. PE webbing is mostly used for scaffolding tarpaulin, through the webbing eyelets you can tie the Elastic Tie onto the scaffolding.  All the tarpaulin components can be provided separately as a single product. Welcome to quote from us!

tarpaulin componentstarpaulin componentstarpaulin componentstarpaulin componentstarpaulin components

Tarpaulin Components

Tarpaulin Components,Galvanized Tarp Rope Hook,Tarp Cover Rope Hook,Tarp Sheet With Rope

HEBEI OHONG PLASTIC CO. LTD. , https://www.tarpaulin-factory.com