Standard Hydraulic Cylinder for Scissor Lift
Technical Parameter
1, Single-acting pushing cylinder.
2, High reliability with simple structure and imported Pare/Hallite/Aston seals.
3, Chromed internal tube surface, which can protect cylinder tube from rust and prolong cylinder service life.
4, Hollow piston rod and air venting device on rod connector are adopted for easy repair venting
5, Adopt environment-friendly bleeder screw which is normally used on automobile brake system.
6, Bore diameter: 80mm; Rod diameter: 40mm; Stroke: 301.5mm; Retracted length: 467.5mm
| Bore Diameter (mm) | 80 |
| Rod Diameter (mm) | 40 |
| Stroke (mm) | 301.5 |
Company Introduction
Built in 1973
Total area 456000 square meter
400 employees, 70 engineers
More than 400 sets equipment
National Patents: 71
Â
Management System
            ISO9001                     ISO/TS16949               IPR
Quality Control
We use Solidworks to design cylinders and do force analysis.
Inspection process: incoming inspection, sampling inspection, process inspection and pre-shipment inspection.
Before the production, we will do chemical composition tests. The uninspected materials are stored in special positions and all inspected materials are able to be traced by size, supplier and date.
During the production, the process cards are placed around to make sure that the workers understand every step clearly. The products are marked for tracking.
Packing & Delivery
The products are fully protected by metal shelves, wood boxes and plastic fillers.
Sales Network
Our products have been exported to North America, Europe, Russia and Southeast Asia, etc. We have established a branch in USA.
Products Application
Our products are mainly used in following industries like car lift, agricultural machines and environmental vehicles. With high quality products and considerate after-sales service, we have established a well-known reputation. 
FAQ
Q1: Are you a trading company or manufacturer?
A1: We are the manufacturer with Exporting License.
Q2: How long have you been in Hydraulic Cylinder industry?
A2: Our factory is built in year 1973 and start by manufacturing Pneumatic Cylinder. From year 1985, we start manufacturing Hydraulic Cylinder.
Q3: How long is your warranty period?
A3: We offer 13 months warranty period after on board.
Q4: How long does it take to process orders?
A4: It usually takes 20-30 days to process. We don't have stock.
Q5: What's your cylinder PPM?
A5: 5000 PPM. We do 100% inspection before delivery.
Q6: Have you been exported to overseas?
A6: We have been exporting to USA, Canada, Germany, Italy, France, Russia, etc.
ContactLena LiÂ
Tel: 86-535-6523027Â Â Â Â Â Â Â Â Fax: 86-535-6528663Â
Website: www.fasthydraulic.com  www.yantaifast.com
Technical Parameter
1, Single-acting pushing cylinder.
2, High reliability with simple structure and imported Pare/Hallite/Aston seals.
3, Chromed internal tube surface, which can protect cylinder tube from rust and prolong cylinder service life.
4, Hollow piston rod and air venting device on rod connector are adopted for easy repair venting
5, Adopt environment-friendly bleeder screw which is normally used on automobile brake system.
6, Bore diameter: 80mm; Rod diameter: 40mm; Stroke: 301.5mm; Retracted length: 467.5mm
| Bore Diameter (mm) | 80 |
| Rod Diameter (mm) | 40 |
| Stroke (mm) | 301.5 |
Company Introduction
Built in 1973
Total area 456000 square meter
400 employees, 70 engineers
More than 400 sets equipment
National Patents: 71
Â
Management System
            ISO9001                     ISO/TS16949               IPR
Quality Control
We use Solidworks to design cylinders and do force analysis.
Inspection process: incoming inspection, sampling inspection, process inspection and pre-shipment inspection.
Before the production, we will do chemical composition tests. The uninspected materials are stored in special positions and all inspected materials are able to be traced by size, supplier and date.
During the production, the process cards are placed around to make sure that the workers understand every step clearly. The products are marked for tracking.
Packing & Delivery
The products are fully protected by metal shelves, wood boxes and plastic fillers.
Sales Network
Our products have been exported to North America, Europe, Russia and Southeast Asia, etc. We have established a branch in USA.
Products Application
Our products are mainly used in following industries like car lift, agricultural machines and environmental vehicles. With high quality products and considerate after-sales service, we have established a well-known reputation.Â
FAQ
Q1: Are you a trading company or manufacturer?
A1: We are the manufacturer with Exporting License.
Q2: How long have you been in Hydraulic Cylinder industry?
A2: Our factory is built in year 1973 and start by manufacturing Pneumatic Cylinder. From year 1985, we start manufacturing Hydraulic Cylinder.
Q3: How long is your warranty period?
A3: We offer 13 months warranty period after on board.
Q4: How long does it take to process orders?
A4: It usually takes 20-30 days to process. We don't have stock.
Q5: What's your cylinder PPM?
A5: 5000 PPM. We do 100% inspection before delivery.
Q6: Have you been exported to overseas?
A6: We have been exporting to USA, Canada, Germany, Italy, France, Russia, etc.
ContactLena LiÂ
Tel: 86-535-6523027Â Â Â Â Â Â Â Â Fax: 86-535-6528663Â
Website: www.fasthydraulic.com  www.yantaifast.com
Soundproof Aluminum Butyl Tape
Soundproof Aluminum Butyl Tape ,Foundation Primer ,Primer Make Up ,Primer For Oily Skin
Plastic Strap & Tape Co., Ltd. , http://www.nbwraptapes.com