The three-in-one connector has become an indispensable part of the current plate furniture market. Its simple installation, connecting plates and economical price have become the darling of the plate furniture market. So what kind of three-in-one connector is suitable for the board? Today we will come to analyze one by one. 1. MDF: MDF has the characteristics of stable performance, non-deformation, uniform density, smooth surface, easy to paste various veneers, etc., so it is most widely used in panel furniture, because the MDF is composed of plant fibers and its nails are nailed. For the difference of force, it is best to use the three-in-one connector in the selection of the connecting piece, and the expansion type embedded part is used to avoid the use of the self-tapping screw two-in-one connector. The two-in-one is not conducive to multiple disassembly and assembly, and the three-in-one connector The nail holding power can be maintained even after repeated disassembly and assembly. 2. MDF: wood fiber or plant fiber to make artificial board, uniform structure, high strength, good elasticity, but moisture absorption, water absorption performance, thickness expansion rate; three-in-one connector suitable for expansion of embedded nuts, should Avoid the use of self-tapping screw two-in-one connector, two-in-one is not conducive to disassembly, and three-in-one can maintain the nail holding force even after repeated disassembly. 3. Particleboard: Particleboard is made of sheet, strip, needle, granular wood chips, shavings, wood silk, sawdust and other materials, dried with adhesive, hardener and water repellent at a certain temperature. The structure is made of cross-staggered structure, the performance of each part is basically the same, the edge is rough and easy to get wet, and the moisture should be taken care of when connecting the parts. Generally, the self-tapping connector with better surface treatment is selected, and the screw can also be selected. Plastic wraps for normal use in wet conditions. 4. Solid wood board: Solid wood board refers to pure natural wood board, which has good texture, environmental protection, natural texture, small heat conduction, high temperature resistance, scratch resistance and no cold and shrinkage in winter. Most of the solid wood panels use studs, and the nails are more connected to the traditional enamel, and less useful three-in-one connectors. Sharing knowledge of furniture hardware, I am a red scarf from Tuochen Hardware. The above is the three-in-one connector for each plate, I hope to give you some help. Http://news.chinawj.com.cn
Magnetic Linear Light
We diviided the led light according to the using eviiroment. Most of our product is the commercial LED Lighting
Commercial lighting is a term used to describe lighting that is used in commercial spaces, including auto dealerships, distribution centers, churches, factories, offices, and warehouses. Unlike residential lighting, commercial lighting is made to withstand more abuse and has a longer lifespan.
While the focus of residential lighting is often on aesthetics, commercial lighting is task orientated. Commercial lighting systems are designed based on what the application is. For example, in an office-type setting, you may see task lighting, which illuminates specific areas where employees need concentrated light to be able to perform their jobs.
Magnetic Linear Light,Mangnetic Linear Tracklight,Magnetic Lighting Track,Recessed Magnetic Track Light
Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.jmdilinlighting.com