Eight tips for paint purchase
1. Try to go to the formal market or specialty store with heavy credit to buy, mainly because the quality of the interior wall paints sold by these enterprises is higher than the results of the supervision and inspection conducted by the Municipal Quality and Technical Supervision Bureau in recent years.
2. Recognize the logo on the product packaging when purchasing, especially the factory name, factory address, product standard number, production date, expiration date and product instruction manual. It is best to purchase products that have passed ISO14001 and ISO9000 system certification. The quality of these products is relatively stable and there are no quality problems.
3. Purchase products that meet the “GB18582-2001 Interior Decoration Materials Interior Wall Coatings Hazardous Substances Limits†standard and obtain environmental certification marks.
4. When purchasing, pay attention to observe whether the packaging container of the product is damaged or inflated. Shake it at the time of purchase to check for cementation. If the paint appears, it cannot be purchased.
5, usually most paint can not be opened on the spot to check the intrinsic quality of the product, so consumers must ask for valid invoices such as invoices and construction instructions when purchasing.
6. Before use, first open the can to check whether the paint has delamination, sinking and agglomeration. If the coating is still in an uneven state after being stirred, it means that the coating cannot be used, and should be negotiated with the paint merchant immediately.
7. Coating construction is also a very important link, and construction should be carried out in strict accordance with the requirements of the product construction instructions.
8. The construction environment should be ventilated. If the product has special requirements for the construction environment, it must be carried out as required.
In addition, the corresponding paint can be selected according to local conditions. For example, a room with a large flow of people should use a paint with good pollution resistance, aging resistance and good color retention, such as strong stain resistance and good color retention. The paint is especially suitable for the living room wall; according to the climatic characteristics, the south should use the paint with good moisture resistance and mildew resistance; in the north, the paint with low temperature resistance and good construction property should be selected.
Concerned about surprises
Label: Paint picks eight tips
Previous: Talking about the cleaning method of sliding door Next: The role of plastic lubricant
Carbon Electrode Paste is produced by putting petroleum coke and asphalt into melting tank to dehydration, melt, then adding them into kneading pot to kneading, molding and sintering.
Fully automated batching, crushing, mixing, kneading, molding, quality assurance, strict control of ash content, volatile, ensure low resistance and high strength.
Materials:Calcined Anthracite Coal,CPC,Anode Scrap,Coal pitch,Coal Tar,Graphite Powder.
Shape:Cylinder,Egg,Trapezoid.
Application:Used in soderburg furnace to make Various alloy, such as Ferro silicon, ferro manginess, ferro silicon manganese,nickel alloy, Chromium alloy.
Carbon Additive,Carbon Additive Carbon,Carbon Additive Carburant,Carbon Raiser
Carbographite Industrial PTE.LTD , http://www.carbographite.com