How to extend the life of the electronic scale?

      First, it is necessary to keep dust and oil from accumulating in various parts of the electronic scale, and keep the movable joints flexible and prevent rust. In addition to moisture-proof scales, electronic scales should be used in a ventilated and dry environment. The temperature should not be too high or too low. The characteristics of the sensor, the characteristics of the electronic components, and the characteristics of the plastic housing determine the service life.
The electronic scale is a precision and valuable instrument. It is recommended that the user formulate the necessary management system, implement special personnel, special management, special purpose, establish necessary use and maintenance records, and do not need to store at a fixed time for long-term, sun protection, moisture proof and dustproof.
       Secondly, avoid the electronic scale from being strongly pushed against impact and impact. When the staff is operating, the force should be appropriate when clicking the button, and the sharp button should not be used to slam the button, because the skin will be broken, which will cause moisture and dust to enter the scale body and instrument.

       Again, do not arbitrarily disassemble the components on the scale. During the normal use of the electronic scale, do not arbitrarily disassemble the components on the electronic scale, and do not disassemble the seal of the sensor and the integrated circuit on the instrument. If you need to repair. It must be carried out under the guidance of the relevant technical personnel or after having certain maintenance knowledge. In case of failure to expand.
       Finally, the battery pack should be charged in time. The battery pack equipped with the electronic scale is a rechargeable battery with a limited capacity. When not in use for a long time or when the power indicator is displayed during work. The battery should be charged in time to avoid excessive battery discharge and affect battery life. Always check the battery package for damage and the leads are intact to prevent short circuits and damage to the battery and circuit.

Ground Screw Driver,for installing Ground Screw, mainly applied for mounting garden fences,traffic guidancs,advertising boards,carports,flagpoles,wooden houses,Constructional Industry and etc. Electric tool max. power consumption is 1800W-5000W and workers can install more effective and saving time. Manual tool also widely used because of easy installation.

Driven piling is well known for the following advantages for construction issues –

Relatively small and lightweight equipment is required
Relatively small cross-section and high strength helps penetration in firm soil
Require minimal site preparation
Spoil free means minimal cost for disposal of site debris
Cost-effectiveness where many piles are required
High productivity compared to traditional concrete raft foundations
Suitability for a variety of ground conditions.

Honde Ground Screw, equipped with the most sophisticated installation machines, ensures your ground mount installation in any soil environment and 
any applications is handled with precision and speed. Honde have developed two type of machinery with the strategic partner for ground screw installation,
 the Electric Pile Driver and Manual Pile Driver.

Pile Driver

Electric Pile Driver,Screw Pile Driver,Hydraulic Pile Driver

Hebei Honde Plastic & Metal Co., Ltd. , http://www.foundation-system.com