Saint Hui Lai solar flexible thin film battery thickness only hair thousandths of the wire
On the morning of March 14, the reporter saw in the Shenghui Lai (Jurong) New Energy Technology Co., Ltd. that the company's first batch of solar flexible thin-film batteries was successfully off the assembly line. Gao Liang, founder of the company, told reporters that the total amount of orders exceeded the current production capacity by 10 times, and the first batch of products will be sent to the United States by the end of March.
Gao Liang introduced that the solar flexible thin-film battery coating machine is the core production equipment of Shenghuilai. Currently, there are only 3 sets in the world, of which 2 are in Jurong and the other is in Nanjing Laboratory. As the world's first production base, two production lines in St. Hui's intelligent workshop are making production orders without interruption. Every 10 seconds, there will be a 6-inch electronic board, from coating machine to circuit printing machine and punching. Baking production line and testing installation, automation, intelligence throughout the entire production process. The thickness of the film is only one thousandth of the thickness of the hair. Each electronic board will be printed positively and negatively. The two printed circuits must be completely overlapped, so automation and intelligence are essential. In the production area of ​​more than 4,000 square meters, there are only more than 20 staff members, 15 of whom are senior engineers from the United States and Sweden.
Gao Liang and the reporter calculated an account: the past 30 years, the new energy market has been occupied by crystalline silicon solar energy, but the production cost of crystalline silicon solar 1W is 0.4 to 0.5 US dollars, solar energy conversion rate of about 17%. The 1GS production cost of the CIGS flexible film solar cell can be reduced to 0.3 US dollars, the estimated solar energy conversion rate can reach 25%, and there will be an annual increase of 1% to 1.5%, up to 31% The conversion rate and the production process are also very environmentally friendly.
"Foreseeable that in the next three years, Jurong will become the world's largest CIGS soft film solar cell production base." Highlighted.
Spring nuts are one-piece, self-locking nuts that secure screws and prevent them from loosening due to vibration. Long spring channel nuts are used to secure screws in framing channels, cable management conduits, and ducting systems.
The nut has an oblong seat for a bolt having an axial insertion opening for the bolt and a holding section for the bolt, where the nut completely encloses the seat on a front wall opposite to the insertion opening in peripheral direction. A cylindrical outer wall is closed in the peripheral direction, and an inner wall encloses the seat on a front face and partly encloses in the peripheral direction. The inner wall includes two radially resilient shackles , which extend in the longitudinal direction of a cylinder.
Spring Nut,Spring Lock Nut,Channel Spring Nut,Stainless Steel Spring Nuts
Taizhou Risco Stainless Steel Products Co.,Ltd , https://www.riscofastener.com