The key features of the cycloid reducer
2019-06-08 07:05:29
1. The reduction ratio is large and the efficiency is high: the first-stage transmission reduction ratio is 9~87, the double-stage transmission reduction ratio is 121~5133, the multi-stage mixing can reach tens of thousands, and the pin-tooth meshing system is rolling friction, the meshing surface is not Relative sliding, so the first-stage deceleration efficiency is 94%.
2, stable operation, low noise: the number of pairs of teeth in contact during operation is large, the degree of coincidence is large, the operation is stable, the overload is strong, the vibration and noise are low, and the noise of various specifications is small.
3, the use of reliable, long life: because the critical parts are selected high carbon alloy steel quenching treatment (HRC58-62), and then refined, and the cycloidal teeth and the pin gear sleeve meshed to the needle teeth into a rolling friction payment, The friction coefficient is small, so that the meshing zone has no relative sliding and the wear is extremely small, so it is durable.
4. Compact structure and small volume: Compared with other reducers of the same power, the weight is smaller than 1/3. Because it is a planetary transmission, the input shaft and the output shaft are on the same axis to obtain the smallest possible size.
We have all kinds of spindles available in our range, while different spindles have different functions. The most standard ones are Slot Spindle, Eccentric hole Spindle, Revolving Spindle, Steel Spindle With Screw and Spindle with adaptors.
Finish available: White Zinc, Yellow Zinc, Blue Zinc, Nickel
Material: Steel
Standard size: 8x8x100/110/120mm etc.
Should you have any further demands, please feel free to contact us any time. And welcome for OEM products with detailed technical drawings.
Steel Spindle With Screw,Revolving Spindle,Steel Handle Spindle,Steel Slot Spindle
Greatwall Hardware International Limited , http://www.greatwall-hardware.com