Pneumatic dual-diaphragm pump for all kinds of corrosive liquids, high viscosity, volatile liquids can be exhausted, in many industries, its use has been recognized by the public. But no one is perfect, pneumatic dual diaphragm pump in the course of the accident may occur, the occurrence of these faults will double the production of pneumatic dual diaphragm pump production, and sometimes even affect the safety of production and equipment, then pneumatic Double diaphragm pump fault what? Is there a corresponding solution? Pneumatic double diaphragm pump failure analysis and solutions 1, failure analysis: liquid leakage from the gas chamber solution Solution: Check the diaphragm is broken; check the diaphragm is properly installed and locked. 2, failure analysis: a large number of bubbles in the export liquid solution Solution: Check the diaphragm rupture; check the pump body and piping for leaks. 3, fault analysis: the pump is running but the flow is too low Solution: Check the pneumatic double diaphragm pump cavitation plaque, adjust the compressed air inlet pressure; Check the valve ball is stuck. If the delivered fluid does not match the material of the valve ball, check that the inlet pipe is clogged. 4, Failure Analysis: Pneumatic dual diaphragm pump can not start or move slowly Solution: Check the filter, pressure and lubrication devices and air inlet filter is blocked; check the valve is stuck by impurities, please remove the valve and Clean, check the valve piston is scratched marks. If the piston surface is bright and not pure, it means wear has to be replaced with piston and O-ring. Check spindle and O-ring for signs of scratches, wear and crushing. Replace if damaged. Through the leakage of liquid from the discharge port of the gas chamber, pneumatic double diaphragm pump can not start or slow movements, the pump is running but the flow is too low, the export liquid contains a lot of bubbles and other four kinds of fault analysis and the corresponding solution introduced, we It can be concluded that the use of pneumatic dual diaphragm pumps can not be easy and smooth, which requires workers to spend more effort at work to make the most reasonable solution to related problems.
The Welded Wire Mesh is welded by excellent
low carbon steel wires and passivated and plasticized through cold plating
(electroplating), hot dipping and PVC plastic coating. With flat surface, even
mesh count, firm welding spots and stable structure, it features its strong
completeness, partial good machining performance, stability, and excellent
corrosion resistance and rush prevention.
Material: steel wire,galvnaized
wire
Opening: 1/4"-4"
Wire Gauge: BWG26 to BWG8 (0.46mm
to 4.0mm)
Package: waterproof paper then pallet,
upon as your request
MOQ: 100rolls
Have exported: USA, EU, Africa,
etc
General Specification Table for reference
GBW
|
Wire diameter
|
Mesh (inch)
|
|
16 Gauge
|
1/2" x 1", 1" x 1", 1" x 2"
|
|
14 Gauge
|
1" x 1", 1" x 2", 2" x 4"
|
|
12-1/2 Gauge
|
2" x 2", 4" x 4"
|
GAW
|
Wire diameter
|
Mesh (inch)
|
|
23
Gauge
|
1/4" x 1/4"
|
|
19
Gauge
|
1/2" x 1/2"
|
|
16
Gauge
|
1/2"x1/2", 1/2"x1",
1"x1", 1"x2"
|
|
14
Gauge
|
1"x1", 1"x2",
2"x2", 2"x4"
|
|
12-1/2 Gauge
|
1/2"x3", 1"x1",
1"x2"
|
|
11
Gauge
|
2"x4", 3"x3"
|
Usage: They are widely used in
industry, agriculture, construction, transport and mining .Such as machine
protection cover, ranch fender, garden Fence, window protection fender, passage
fender, fowl cage, egg basket, foodstuffs basket, etc.
Galvanized Welded Wire Mesh
Welded Mesh Poultry Netting,Galvanized Welded Stucco Mesh,Welded Wall Plaster Wire Mesh,Galvanized Hardware Cloth
Anping Enzar Metal Products Co.,Ltd. , https://www.enzarmetal.com