What should I do with melon? Method for preventing melon from suffering

Ways to prevent melon from suffering:

Improve the light conditions Protect the melon when it is covered with a drop-free film and keep the film clean. Try to get the maximum light transmittance and make the soil accumulate more heat. Release the reduced plants, properly dilute the plants, pay attention to pruning, tying the vines, picking the heart, and comprehensively improve the lighting conditions in the field.

Scientific application of fertilizer and fertilizer should be carried out with more organic fertilizers. In particular, it is necessary to apply high-quality organic fertilizers such as chicken manure and cake fertilizer that are fully decomposed and harmlessly treated. Do not apply excessive nitrogen fertilizer. Watering is reasonable, keeping the soil with enough water, watering should be a small number of times, it is not easy to water on rainy days, it is better to water on sunny days.

Keep the proper melon position and do not leave the root melon. Generally, the bitterness is mostly on the root melon. Because the root melon is close to the root of the plant, the effective function leaves are few, the nutrient condition is poor, and if the fruit is in a low temperature period, the lack of light and malnutrition In the case of the case, it is easy to make the melon skin thick and bitter, but the melon node cannot be too far from the root. Apply 15 kg of water to each capsule of Zhuang Gu Ti Ling, so that the melon can be prevented from falling, fragrant, sweetened and swollen. Improve plant water absorption and fertilizer absorption, and improve fruit yield and quality.

40W Glue Guns Features:

1. Versatile

2. Easy

3. Quick

4. Proective Nozzle Cover

5. Trigger Flow Control

6. Bonds instantly

7. High quality

8. High temperature or low temperature

9. New design

10. With switch function

11. Big power

12. Industrial use

Idea for many applications. Fastening various materials such as paper, cardboard, fabric,wood, lace,trims,leather,metal,glass, tiles, rubber, ceramics and flooring etc.Ideal for hobby and household repair,DIY&craft projects.

Designed and manufactured to the highest of standards to ensure a robust and long life, we hope it provides you with many years of trouble-free, safe and reliable service.

General Safety Information:

1. Check if the plug cord was in good condition, and if there is stand before plug into the electrical outlet ; Check if the used glue gun has glue flow through back of the tunnel;

2. wait 5-10 minutes to allow glue to soften, stand up the glue gun on the table when not in use;

3. Touch nozzle to any clean, dry surface you wish to bond, to avoid any impurity stop the nozzle;

4. If the glue could not flow from the nozzle when the glue gun start to work, check if the glue gun are heating;

If glue gun can not be heated, there are following reasons:
1 Plug cord into electrical outlet not properly;
2 Glue gun has been destroyed owing to inner cord short circuit;

If glue gun can be heated, there are following reasons: Nozzle has been stopped by any impurity, ask careerman to manage it.

5. Do not use the glue gun under moist climate, humidity will affect insulation and cause electric shock;

6. Do not touch the nozzle or melted glue;

7. Do not remove out the melted glue stick from the tunnel back side, it will damaged the glue gun as well as scalding person hands.

8. Do not to disassemble or assemble any glue gun accessories freely, it will cause glue gun do not work properly;

9. Keep out of reach of children and stocked it beyond any of Children palpable side;

10. Only used for melting glue stick, no other usage;

11. When in use, there are any glue flow back from tunnel, stop using immediately, wait for careerman clean the glue;

12. Close the power if the glue gun not in use after 15 minutes;

Using methods

1. Glue gun using voltage is 110-220V AC,50/60Hz;

2. Tip gun forward on stand and place a piece of cardboard under the nozzle

3. Use 7-8mm (mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticks through
tunnel at back of gun

4. After power, wait for 5-10 minutes to allow glue to soften

Professional Glue Gun

Professional Glue Gun, 40W Glue Guns, Silicone Glue Gun, Hot Melt Glue Gun

Ningbo Kingvos Electrical Appliance Co.,Ltd , http://www.kingvos.com