Home>Bearing knowledge>How to avoid smooth oil quality deterioration

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Avoidance of smooth oil quality deterioration

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The reason for the deterioration of smooth oil quality is mainly due to the fact that it is mainly caused during the operation; it is also because the operator does not handle it properly; it also causes the oil to be fouled. Therefore, try to avoid premature deterioration of the system oil; Saving oil is very necessary. Some of the following considerations to avoid deterioration of oil are summarized as follows:
1) All kinds of oils need to be used according to the rules; because the machine is used to participate in different types of oils with different quality or quality; it can lead to various bad results.
2) During the transfer of oil or when oiling; use regular sealed containers and things; do not put oil into the dusty container; to prevent oil from staining.
3) When refueling the machine; pay attention to not let dust, dirt and water fall into the oil; because the life of the machine depends to a large extent on the cleanliness of the oil.
4) Although the oil is not easy to volatilize; but because it is added to the machine or the container; often because of overfilling and leakage, it causes a large loss of oil. Therefore; when operating and adding oil to the machine; be careful; do not make oil Lost.
5) When loading oil into the fuel tank and oil drum; do not exceed the limit of their capacity. It is necessary to leave room for the oil to be inflated by heat in the container; to avoid the oil from being swollen by heat;
6) Always check the cover of the machine casing and system oil reservoir and the tightness of the pipe joint; tighten the joint of the machine or replace the sealing gasket; to prevent oil leakage.
7) After the waste oil is released; before the new oil is poured; the system should be completely removed and cleaned.
8) The water and sludge accumulated in the oil should be removed regularly or in succession.
9) Adhere to the smoothness and sleekness of the machine; do not subject the machine to large wear and tear; because the machine parts wear out, the gap will increase; the oil will become more fouling.
10) The temperature of the oil usually does not exceed 50~60 °C; when the amount of heat released is large; the cooling condition of the oil should be ensured.
11) In the air compressor; the temperature at the outlet is not allowed to exceed 160~170 °C.
12) A smooth oil filter should be installed in the car and the tractor; the smooth oil should be continuously finely filtered during the operation; to avoid the smooth oil in the engine becoming waste oil due to the accumulation of mechanical impurities and oxidized products.

---

Recommend to friends comments close window

Bearing related knowledge

The cause of abnormal damage to the hub bearing NTN bearing application considerations to view common anomalous bearing anomalies when replacing roller bearings Note Timken: Analysis of bearing damage

This article links to http://
Please indicate China Bearing Network http://

Previous: Joint bearing next edition: waterproof sealing smooth grease

BTO-22 Concertina Razor Barbed Wire

 
1: Razor Barbed Wire description
 razor Barbed Wire Material:
(razor wire\razor barbed wire)
 High carbon steel,galvanized steel sheet and wire,stainless steel sheet and,hot dipped galvanized Razor Barbed Wire is popular in the market.
 
 razor barbed wire surface finished:
(razor wire\razor barbed wire)
 Electro galvanized,Hot dipped galvanized,Stainless steel
 
 
 razor barbed wire Characteristics:
 
(razor wire\razor barbed wire)
 
 Razor barbed wire mesh is a new kind of protective fencing with such advantages as beautiful appearance,economical cost and practicality,and convenient construction.
 
Safety razor barbed wire Applications:
 (razor wire\razor barbed wire\ Continuous Razor Barbed Wire \ Iron Wire With Point )
 Razor wire can be installed in the form of barbed tape wire or concertina coil to walls or fencing. It also can be suitable for industry,agriculture,animal husbandry,dwelling house,plantation or fencing.
 Razor wire is widely used to manufacture the wire Fence for a fencing system or security system 
 and is applicable in military field,airports fencing,prisons protection,government buildings and other national security facilities.
Barbed Tape Wire Specification

Galvanized Razor Barbed Wire

concertina Razor Barbed Wire, Galvanized Razor Barbed Wire, Galvanized Barbed Wire,Iron Wire With Point

Anping Weihao Hardware Wire Mesh Products Co., Ltd. ,