Bar partition design fashion Petty
What is the appropriate place for the bar partition?
1. If your house is at a high level, because you have a viewing height, you can choose to place the bar in front of the floor-to-ceiling windows so that you can enjoy the beauty of the environment brought by the excellent visual field while drinking and drinking tea.
The selection of the bar position will also directly affect the circuit and water supply design related to it. If it is placed far away from the pipe or the drain pipe, it will cause some difficulties for the drainage, and the drainage pipe must also have certain The angle of inclination. If the bar is placed close to the outdoors, the drain can be taken outdoors and drained in a separate line. If it is to be connected to a pipeline, it must be piped from the ceiling or wall, but this works. It will be very troublesome.
2. If you use electric appliances with high power consumption, such as induction cookers for coffee, in the bar, it is best to design a circuit in this block to avoid circuit tripping.
3. If the space in the home is large enough, you can place the bar in the lounge or the audio-visual room. This installation position is just in line with its function. In addition, the bar can also be selected where it can attract people to seize, for example, Place the bar opposite the television in the living room so that many people can enjoy the wonderful TV programs while watching the drinks, or watch a wonderful movie, which can provide the chat material.
[bar partition design considerations]
1, the choice of bar position will also directly affect the circuit and water supply and drainage design related to it, if you put it away from the pipe or the drainage pipe in the far corner, it will cause some difficulties for the drainage, and the drainage pipe must also There is a certain degree of inclination. If the bar is placed close to the outdoors, the drain can be taken outdoors and drained in a separate line. If it is to be connected to a pipeline, it must be piped from the ceiling or wall, but this works. It will be very troublesome.
2. The location of course will also affect the design of the circuit and the water supply and drainage, especially when it is away from the pipe or drain pipe, the drainage becomes a big problem. The drain pipe should have a certain inclination angle. If the bar is near the outdoor location, the drain pipe can be taken outdoors and drained in a separate line; if the pipe has to be connected to the pipe and the slope is not enough, the pipe must be installed from the ceiling or the wall. Construction is troublesome. The cost will also increase.
3, if you want to use high-power electrical appliances in the bar, such as induction cookers, etc., it is best to design a separate circuit to avoid circuit tripping.
4, using the corner and built into the bar, the operating space needs at least 90cm, and the height of the bar has two sizes, single bar about 110cm up and down, double bar is 80cm and 105cm, the gap between at least 25cm, the inner layer Place items.
Xiao Bian concludes: We introduced the bar partition design taboo for everyone. We hope to help everyone. For more relevant knowledge, please continue to pay attention to this website information platform. Follow-up will present more exciting content for everyone.
Partition Bar Decoration Fashion Kitchen Partition Decoration Design Home Bar Partition Decoration Design Fashion New Chinese Style Fashion Breaking Bar
Ferrites are usually non-conductive ferrimagnetic ceramic compounds derived from iron oxides such as hematite (Fe2O3) or magnFerrites are usually non-conductive ferrimagnetic ceramic compounds derived from iron oxides such as hematite (Fe2O3) or magnetite (Fe3O4) as well as oxides of other metals.
Manufacturing process:
1). Dry process:By dry process, can produce isotropic & anisotropic magnets. The tool can be changed and developed easily.
2). Wet process:By wet process, only anisotropic magnets can be produced. It is complicated to change the tool and the tooling charge is much higher.
Magnetization:
1). Isotropic ferrite magnets are not oriented and can be magnetized in any direction.
2). Anisotropic ferrite magnets are different, they are all oriented in the manufacturing direction, and should be magnetized in the direction of orientation.
Ferrite Magnet,Sintered Ferrite Magnet,Ferrite Round Magnet,Hard Ferrite Magnet
Chongqing Great Well Magnet Co.,ltd. , https://www.gwmagnet.com