Bathroom Shower Set with Project Price (BM-60075A)

1, Brife introduction of BESTME Shower set


 
2, Why choose Bestme faucet?

(1) Cartridge
   the cartridge with ceramic for smooth and long lasting operation without leakage after 500.000 times.

(2) Aerator
   Advanced ABS engineering plastic, no harm to health. Air injection technology, reduce 30% water waste.
   Anti splash, durable, strong corrosion resistance.

(3) Hose
   The 304 stainless steel flexible hose,explosion proof, crack proof and anti leakage

(4) Handle
   Constant bright technology. Skillful polishing process, bright plating treatment for brilliant chrome surface to ensure 
   the products is long-lsting as new.
 
3. Service  

 (1) Our service
    We are glad to offter airport pick-up and hotel reservation service. Bestme will offter sincere service to
    our respected clients after their arrival at Foshan.

 (2) Our Certificates $ test report  can apply for CE and WT certificates, others are negotiable.

 (3) Express
 We are glad to offter you samples and samples will be sent by our cooperated express: DHL/FEDEX/UPS etc.


4, Company Information

Bestme is a brand specialized in modern and fashionable sanitary ware . All these years, motivated by the morden
intelligent styleS and the modern healthy concept of enviromental protection, we are dedicated to provide customers
with new bath experience, relaxation comfort and warmth.





5, FAQ

Q: When can you deliver the goods?
A: If stock available, We can deliver goods within 7 days. if no stock, that would be 20-35 days after receiving
deposit.

Q: How about you payment terms?
A: Our payment term is by T/T, 30% as deposit, balance 70% by T/T or L/C before shipment.

Q: What is your main market?
A: Our main market is Middle east, Southernest Asia, South America, Africa, European Countries.

 
 
 

Die components

The main components for die In a hole toolsets are:

• Die block – This is the main part that all the other parts are attached to.
• Punch plate – This part holds and supports the different punches in place.
• Blank punch – This part along with the blank die produces the blanked part.
• Pierce punch – This part along with the pierce die removes parts from the blanked finished part.
• Stripper plate – This is used to hold the material down on the blank/pierce die and strip the material off the punches.
• Pilot – This will help to place the sheet accurately for the next stage of operation.
• Guide, back gauge, or finger stop – These parts are all used to make sure that the material being worked on always goes in the same position, within the die, as the last one.
• Setting (stop) block – This part is used to control the depth that the punch goes into the die.
• Blanking dies in a hole – See blanking punch
• Pierce die in a hole– See pierce punch.
• Shank – used to hold in the presses. it should be aligned and situated at the center of gravity of the plate.
• The most important component of the automobile mold is the cover mold. This type of die is mainly a cold die. "Automobile mold" in a broad sense is the general term for the molds used to make all the parts on the car. For example, stamping molds, injection molds, forging molds, casting wax molds, glass molds, etc.
  The stamping parts on the car body are roughly divided into cover parts, beam parts and general stamping parts. The stampings that can clearly characterize the image of the car are car covers. Therefore, a more specific car mold can be said to be "a stamping mold for automobile cover parts". Referred to as the automobile cover die. For example, the trimming die for the outer panel of the front door, the punching die for the inner panel of the front door, etc.
  Of course, not only the body of the car has stamping parts. The molds of all stamping parts on automobiles are called "auto stamping dies". The summary is:
  1. Automobile mold is the general term for the molds that make all the parts on the car.
  2. Auto stamping die is a die for stamping all stamping parts on the car.
  3. The automobile body stamping die is a die for stamping all stamping parts on the automobile body.
  4. The stamping die for automobile cover parts is a die for punching all the cover parts on the car body.
  
  

Components For Automobile Dies

Ball Sleeve,Auto Mold Parts,Custom Wear Plate,Cam Bottom Guide Plate

Dayue Precision Technology (Dongguan) Co., Ltd. , https://www.dayuechn.com