Home>Bearing knowledge>Features of die-cast cages and cast-and-cast cages

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Die Casting Cage and Plastic Casting Cage Features

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The original material of the thin (13) blame 3 die-cast cage is aluminum alloy and brass; the original material is melted and poured into the die-casting mold of the die-casting machine; the cage is die-casted at one time. The casting gate is driven on the lathe. The craftsmanship of the party is:
.1) The cage is directly die-cast; it can achieve outstanding shape and scale accuracy; no machining is required; production efficiency is high.
.2) After die casting; metal crystals are condensed; finely arranged; good appearance and wear resistance.
.3) High data utilization rate; lower cost.
However, when die-casting aluminum alloy cages; large-tonnage equipment is required; mold design and production are messy; the die-casting holes are simply scratched during die-casting. Under the condition that the bearings are subjected to impact, sensation and speed, the demand is further improved. the quality of.
2. Plastic casting method to make the cage to put the vacuum dry granular engineering plastic into the barrel; to melt into a semi-liquid state by heating with a resistance wire; pressurizing with a plunger or moving the screw; and writing the semi-liquid material from the nozzle into the injection molding machine In the forming mold; after holding and cooling, the required cage is obtained. His craft features are:
.1) The holder is plastically formed at one time; it can obtain accurate shape and scale accuracy and low surface roughness value; no machining is required; production efficiency is high.
.2) Simple mold and plastic casting; easy installation of bearings; simple automatic control.
.3) Plastic cages have outstanding functions such as wear resistance, antimagnetic and low conflict.
However, due to the defects of thermal deformation, aging and brittleness of the plastic itself; and some problems in the layout of the cage and the plastic injection process; the use of the plastic cage is limited.

---

Recommend to friends comments close window

Bearing related knowledge

Bearing grinding processing skills analysis of the assembly and disassembly of the bearing what are the precautions of wind power gearbox bearing application characteristics analysis of the production of the bearing ring ferrule production process why the bearing will be damaged?

This article links to http://
Please indicate the bearing network http://

Previous: Magnetic pump often presents the following problems: TIMKEN imported bearing device directly affects the service life of the bearing

N Series American Standard Switch

Luxury Switch,Luxury Wall Switch,Remote Control Socket

Rocker Switch Co,.Ltd , http://www.onbswitch.net