Gate valve advantages and disadvantages
2019-01-20 20:03:51
Gate valve has the following advantages: fluid resistance is small, the sealing surface of the media by the small brush and erosion. Open and close more effort. The medium flow is unrestricted, does not disturb the flow, does not reduce the pressure. Simple body, short structure length, good manufacturability and wide range of application. Gate valve shortcomings are as follows: Between the sealing surface easily lead to erosion and abrasion, maintenance more difficult. Large size, open the need for a certain space, open and close a long time. The structure is more complex. Zhakuang types, according to the sealing surface configuration can be divided into wedge gate valve and parallel gate valve, wedge gate valve can be divided into: single gate type, double gate type and elastic gate type; parallel gate valve Can be divided into single gate and double gate type. According to the thread position of the stem division, can be divided into Ming rod valve and dark rod gate valve two. Gate valve installation and maintenance should note the following: Hand wheel, handle and transmission are not allowed to lift, and no collision. Double gate valve should be installed vertically (ie stem in a vertical position, the hand wheel at the top). The gate valve with bypass valve should open the bypass valve before opening (to balance the pressure difference between inlet and outlet and reduce the opening force). Gate valve with transmission, according to the instructions of the product installation instructions. If the valve is always on and off, lubricate at least once a month
Galvanized Steel Gratings,Galvanized Floor Metal Bar,galvanized trench grating
Lihongyuan Steel Grating Co., Ltd. , http://www.steelgrating-supplies.com