How to clean dirt on plastic products?

In our daily life, plastic products can be seen everywhere, but plastic products will inevitably accumulate a circle of dirt for a long time, and it is difficult to clean them only with water. So what are the tricks to make plastic products in your home bright and new? Please see below:
Take the plastic basin in the home as an example:
1. Soak the plastic pot with very hot water for 5-10 minutes (dirty, you can soak for a while) to soften the dirt.
2, find a few egg shells, put them into a bowl and crush them into pieces.
3. Pour the water out of the plastic basin, soak the rag, and smash the eggshell in the inner wall of the plastic basin, and turn it back and forth several times.
4. Squeeze a little detergent on the rag and continue to rub in the basin to achieve the purpose of removing grease.
5. Finally, rinse the plastic pot with clean water. Look at it! The dirt on the washbasin is gone.
A small trick to clean the dirt in the plastic basin :
Coup 1: Once you have used the washbasin, you can pour the appropriate decontamination powder into the basin, then wipe it with a rag and rinse it off with clean water. You can also use a hot water to wet the towel after using it, then wipe the wash basin with soap, and then wash it with water. It is a very simple method, and it will not occupy much time.
Coup 2: Wrap the rest of the tea with gauze, wipe it with a proper amount of cooking oil, and then wash it with a small amount of detergent. This method avoids scratching the surface of plastic products compared to conventional scrubbing with a melon cloth. However, if the surface of the plastic product is scratched after being scratched, the dirt is more likely to accumulate.
Coup 3: You can squeeze the toothpaste on the brush, then brush the dirt in the plastic washbasin. Everyone can see that the dirt has been brushed off, because the toothpaste generally contains abrasives, which is easy. It can remove the dirt attached to the smooth surface, and this method is not only simple and convenient to operate, but also does not damage the washbasin. The effect is very good.
Coup 4: Find a good rubber, press the washbasin on the basin, rub the circle, and circle it to ensure that all the dirty things are gone. Then wipe the rubber foam with a cloth and wipe it off, just like the new one.
Coup 5: The plastic basin is soaked, sprinkle with dry detergent and wash it cleanly, and it will be washed in a while.
Other plastic products can also try to clean them up with the above methods, you may wish to try it!

Environmental Industry Roll Forming Line

Metal Rolling,Roll Forming Machine With Industrial,Environmental Industry Roll Forming Machine,Environmental Industry Roll Forming Line

Xinxiang Tianfeng Machinery Manufacture Co., Ltd. , https://www.frollforming.de