The Advantages of Glass Brick Walls
The glass brick wall is actually well understood, that is, a wall that is designed using glass. Usually, the wall is widely used in various high-grade places, and the glass brick is also divided into hollow and solid. Although it is a wall, but it does not have the load-bearing function of the wall, but there are some other features of the wall, and more beautiful, here we come to understand the advantages of glass brick wall , as well as the construction of glass brick wall specifications. 
The advantages of glass brick walls
1, energy conservation and environmental protection at reasonable prices
The local materials used in glass brick walls are usually not doped with harmful substances, and there are no radioactive materials possessed by ceramic stones. They are non-toxic, non-polluting, non-polluting, odorless, and non-irritant, and do not constitute any infringement on the human body. Glass bricks have a variety of advantages, rare is the price is not expensive, material plus construction to the current price level to count glass brick structure in 300 yuan, which is not expensive compared to other decorative materials.
2, light and sound insulation
The material has the advantage that many materials do not have, and so it will also have relatively poor, such as glass tiles have high light performance characteristics, he can also diffuse light through the diffuse, so that the entire room is filled with soft light, Solve the discomfort caused by direct sunlight. The single-layer glass brick structure can meet the requirements of sound insulation level 5. Double-glazed brick walls with a spacing of less than 50 mm can meet the requirements of sound insulation level 6. As a transmissive soundproofing material, good soundproofing effects can be obtained whether it is a noisy road or used around a factory. 
3, dust, moisture, anti-condensation
There is also the advantage of the three aspects of glass bricks that are better than ordinary double glass, and glass bricks can also play an outstanding role in preventing fogging. For example, when the indoor temperature is 20 degrees Celsius and the humidity is 60%, the outdoor temperature is not fogged even at minus 2 degrees Celsius, and the thermal insulation performance saves energy, and a fresh atmosphere is created due to non-atomization.
Process specification for construction of glass brick walls
One: construction process
1. Preparation of materials before construction: Glass bricks, cement, sand, admixtures, steel bars, wire blankets, channel steels, metal profile frames, etc.
2. Mix the white cement, fine sand, construction glue, and water into a mortar according to the ratio of 10:10:0.3:3.
3. Install "+" or "T" positioning brackets.
4. Build glass bricks with mortar, layer by layer, layer by layer.
5. After the brickwork is completed, remove excess plates from the positioning bracket.
6, use greasy knife joints, and remove excess mortar.
7, timely wipe the mortar on the glass brick with a damp rag. 
II: Construction Acceptance Criteria
1. The type, performance, pattern and color of the glass brick used must meet the requirements.
2, the product needs to have a certificate, product quality certification.
3. The buckwheat ribs embedded in the partition wall masonry should be firmly connected to the base structure and in the correct position.
4, masonry should be solid, end parts and viscous to be solid.
5, the surface should be consistent color, beautiful, smooth and clear.
6. The partition wall is vertical and horizontal, and there are no cracks or defects in the glass bricks.
7, also corresponds to the verticality, surface flatness, joint height difference, seam straightness, square inspection. 
The above advantages on the glass brick wall, and related content construction of glass brick walls regulate the process of introduction here, I hope these help you, if you still do not understand where you can find out more information, please continue to focus on our website.
According to the inspection and detection of the authority, the combustion performance of the ASP Steel Roof Sheet has reached GB8624A level (non combustion level). Compared with the B1 level (non combustion level) of the combustion performance of the traditional resin tile, the fire performance of the building materials has been effectively improved. For the building roof waterproof with high fire protection level, the steel plastic composite tile is undoubtedly an ideal material. It is a new choice of tile for modern factory, plant, workshop, warehouse.
Steel Roof Panels,Asp Steel Roof Sheet,Metal Roofing Sheets,Corrugated Metal Roofing Sheets
PINGYUN INTERNATIONAL , https://www.pingyunconstruction.com