Internal combustion engine fuel use
Fuel is the power source of the generator, and it is also the main factor causing the generator failure. It is extremely important that the clean fuel does not contain moisture and impurities, otherwise the fuel injection pump and the oil nozzle will be seriously worn or even damaged.
The problem of fuel quality in China has always been the main cause of the reduction of generator life and failure. Therefore, the use of imported generators should use high-quality low-sulfur fuels as much as possible. If the requirements are not met, the pipelines can be modified and added before the oil-water separator. The primary coarse filter or the oil-water separator selects the filter grade based on the output power of the generator.
In the case of using inferior fuel oil, the fuel tank must be cleaned regularly. Otherwise, it is easy to contain water and impurities in the fuel tank because of inferior fuel oil. It will accumulate in the tank wall and the bottom of the tank, and the accumulated mud will fall off if it is not cleaned for a long time. In the work, the fuel line is entered, causing blockage of the pipeline or fuel filter, etc., and good maintenance habits are required in daily maintenance, and the water in the tank is drained and the water is deposited in the oil-water separator.
Compression Spring,Auto Parts,Small Coil Springs for Lamp Accessories
Compression Spring,Extension Spring,Torsion Spring Co., Ltd. , http://www.nssprings.com