Home>Bearing knowledge>Joint bearing

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Joint bearing

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The joint bearing is smooth and self-smooth. The joint bearing is a special type of plain bearing. Its layout is simpler than that of the rolling bearing; it is mainly composed of an outer ring with an inner spherical surface; it can accept a large load; it is different from the inner ring with an outer spherical surface. Type and layout; capable of accepting radial loads, axial loads or combined loads of radial and axial forces.
The joint bearing is usually used for the lower speed rocking motion (ie, the angular motion; it can also be used for the skew motion (ie, the centering motion); because the sliding surface is spherical); the bearing shaft and the shaft hole are not When the heart is large, it can still work normally.

---

Recommend to friends comments close window

Bearing related knowledge

Method of locking the bearing JDB bearing---New product bearing device required for mold occupation, common sense needle roller bearing

This article links to http://
Please indicate China Bearing Network http://

Previous:Product Analysis: Needle Roller and Cage Assembly Next: Avoidance of Smooth Oil Quality Deterioration

Polycarbonate Locking system

Plastic Sheet Stock,Plastic Sheet Price,Plastic Sheet

Fenghua Jade Motor Co., Ltd. , http://www.hypcsheets.com