Solenoid valve failure how to rule out

First, the solenoid valve does not work after power Check the power supply connection is not good → re-wiring and connector connection Check the power supply voltage is within the scope of work → → tune the normal range of the coil is not desoldering → re-welding coil short circuit → change coil working pressure The difference is not appropriate → adjust the pressure difference → or replace the appropriate solenoid valve fluid temperature is too high → replace the solenoid valve has the appropriate impurity impurities so that the main solenoid valve solenoid valve and move the core → cleaning, seal damage should be replaced Sealed and installed filter Liquid viscosity is too high, the frequency is too high and life has been → Replace the product Second, the solenoid valve can not close the main spool or iron core seal has been damaged → Change the seal fluid temperature, viscosity is too high → Replace the opposite solenoid valve impurities into the solenoid valve spool or move the core → cleaning spring has reached or deformed life → replace the orifice balance hole blocked → promptly clean the working frequency is too high or life has been to → re-election product or update Product Third, other circumstances Leakage → Check the seal is damaged, the spring assembly is not good External leakage → loose connections or seals have been damaged Replace the screws or fasteners loose on the head of the seal → noise power, tightened. Voltage fluctuation is not within the allowable range, adjust the voltage. Core suction surface impurities or uneven, timely cleaning.

Overhead Shower

Overhead Shower,Aquasource Shower Head,Shower Head for Taps,Matte Black Rain Shower Head

kaiping aida sanitary ware technology co.,ltd , https://www.aidafaucets.com