Using motorized cutter common sense
2019-08-08 14:04:17
Use motorized winch common sense motorized winch, diesel motorized winch, gasoline motorized winch brake:
There are two types of brake devices: automatic clamping brake and clutch transmission interlocking brake, which act as braking in both the positive and negative directions.
Hand crank:
In the working process, if the prime mover fails and the suspended object is not in the upper limit, the hand shake device can be moved to suspend or return the suspended object to the ground.
Motorized winch, diesel motorized winch, gasoline motorized winch
Lubrication method:
The parts in the gearbox of the grinder are oily and the outer bearing is made of butter.
Before starting the machine, the winch drive clutch must be turned on, and the front and rear shift levers must be turned to the neutral position before they can be turned on.
When the clutch is toggled, the action should be fast, otherwise the interlocking brake will not work, forming an impact force that increases the automatic brake pawl. When starting up, it should not be too hard, until the pulley can drive the input shaft to rotate without slipping.
The transmission clutch must be opened when the gear is changed. Otherwise, the gear will be damaged. After the gear is changed, check whether the gear is tight or not to prevent the gear from jumping.
Http://news.chinawj.com.cn Submission:
There are two types of brake devices: automatic clamping brake and clutch transmission interlocking brake, which act as braking in both the positive and negative directions.
Hand crank:
In the working process, if the prime mover fails and the suspended object is not in the upper limit, the hand shake device can be moved to suspend or return the suspended object to the ground.
Motorized winch, diesel motorized winch, gasoline motorized winch
Lubrication method:
The parts in the gearbox of the grinder are oily and the outer bearing is made of butter.
Before starting the machine, the winch drive clutch must be turned on, and the front and rear shift levers must be turned to the neutral position before they can be turned on.
When the clutch is toggled, the action should be fast, otherwise the interlocking brake will not work, forming an impact force that increases the automatic brake pawl. When starting up, it should not be too hard, until the pulley can drive the input shaft to rotate without slipping.
The transmission clutch must be opened when the gear is changed. Otherwise, the gear will be damaged. After the gear is changed, check whether the gear is tight or not to prevent the gear from jumping.
Http://news.chinawj.com.cn Submission:
Graphite Electrodes mainly use needle coke, petroleum coke, as raw material, coal pitch as binder, calcination, ingredients, kneading, molding, baking and graphitization, machining and made, which is released in electric arc furnace in the form of arc conductor of electricity to heat melting furnace charge, Graphite Electrode with low resistivity, graphite electrode good conductivity, graphite electrode low ash, graphite electrode uniform and compact structure, good oxidation resistance, high mechanical strength, etc.
Uhp 400 Graphite Electrode,Graphite Electrode Rp Hp Uhp,Graphite Electrode 400 With Nipples,Electrode Graphite Uhp 400
Carbographite Industrial PTE.LTD , http://www.carbographite.com