How to deal with empty brick wall
For the aesthetics of home improvement, everyone will choose tiles to decorate the wall, but there will be many annoying situations when tiling the wall tiles, such as problems such as hollow walls. So, let's introduce how to do the wall brick hollow drum and how to deal with the wall brick hollow drum next!
What to do with empty brick wall
1. If the wall tiles appear hollow, remove them, clean the mortar adhering to the tiles, then mix with 107 glue mixed with a little cement to make a paste, and evenly apply a thin layer to the back The layer, which is pressed against the tiles later, will be firm after almost a few hours.
2. You can hit the tiles with a hammer. If you hear a hollow sound, it means that the tiles are hollow. However, some tiles are stuck firmly, and it is not easy to remove them. At this time, you can use grouting to remedy. Mix the mortar evenly, then pour the mortar into the empty place with a thin scraper at the gap between the tiles. When you are working, tap and tap while you hear the very solid sound.
3. If the tiles are only detached, the sand and ash can be removed at the detached place when repairing, and then epoxy resin adhesive is injected into it. After drying, fill the joint with waterproof flexible caulking material. .
4. If there are serious cracks in the tiles, it is best to replace them directly, but be careful when changing the tiles, and ask a professional to construct them. The effect will be more beautiful.
5. If the wall tiles are dropped together with the mortar, at this time, you can lightly dig some pits on the original foundation, and then mix the mortar with 107 glue to reinstall. If the wall tiles are only partly detached, the mortar on the foundation surface must not be hit hard. This is to prevent loosening of the originally strong ceramic tiles.
Is it OK to deal with empty bricks?
1. Partial hollow drum
If the wall tiles are partially hollow, which does not affect the safety of furniture, home appliances and family members, they can be left out for a while, but if there are hidden dangers, then the hollow drum tiles should be knocked out and re-paved immediately.
2. Corner drum
If the edge is empty, the tiles may not be replaced temporarily, but they must be dealt with as soon as possible. When processing, you can smash the gap of the tile with a shovel, and then mix the cement and water. The hollow part of the wall brick will automatically absorb the cement slurry until it is filled and waits for it to solidify.
3. 2/3 area hollow drum
If this happens, you should ask a professional master to reapply it. It is best to use adhesive cement, which is more sticky than ordinary cement.
Editor's summary: What should I do about the wall brick hollow drum and whether the wall brick hollow drum is not dealt with, I will introduce it here. I hope it will be helpful to everyone. For more related knowledge, you can follow the information on this website.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
What to do with empty brick wall
Automatic Door Operator Sliding,Automatic Glass Door Drive System,Auto Door Operators,Automated Door Operator
Caesar door control co.,ltd , https://www.caesar-door.com