How to install the shower room shower room to buy tips
In the life of the shower room is still a great role, with it can effectively achieve the separation of wet and dry, but also play a warm role in the winter, but some home owners installed shower room, there will be seepage and leakage, Insufficient installation, sliding door pull and other problems. Next Xiaobian introduced how to install the shower room and shower room.
How to install the shower room
1. Preparation: Prepare the materials and tools needed for the shower room installation.
2, the installation of the bottom basin: a good combination of chassis parts, adjust the level of the chassis to ensure that there is no water in the basin, the basin. The hose is to be telescoped with the distance, connecting the chassis and the floor drain securely.
3, test, protection: After the installation of a water test to ensure unobstructed water.
4. Install aluminum: In the place where the hole was drilled, tap the glue, and then screw the aluminum bar to the wall to reinforce it.
5. Fix the glass: Fix the glass under the chassis with screws.
6. Install the top tube: Fix the top tube on the top of the glass and fix it on the top of the glass with the bend tube.
7. Secure the rack: Hold the rack vertically and horizontally, and then fix it on the deck glass with screws.
8. Fix the hardware of the movable door at the reserved hole, and adjust the position of the axis of the lotus leaf to close the door conveniently and feel good.
9, do a good job of waterproofing: Install a water barrier on the side or below the glass, use silicone to seam the wall, glass and bottom basin joints.
10. Commissioning tightening: Check if there is any problem with each component, and adjust the problem promptly.
11. Closing work: Insert the decorative aluminum strip into the wall to ensure that the appearance is clean and generous.
Shower room purchase tips
1, to see if the glass is bright, can not have air bubble impurities, will affect the hardness of the glass.
2. Check if glass has China 3C certification mark.
3, to aluminum hardness, hardness is one of the important assessment criteria
4, check whether the aluminum is smooth, to prevent the purchase of second-hand scrap aluminum.
5, look at the roller skating material, roller skating to choose compressive resistant material, sealing performance is better, so that water vapor will not enter the wheel.
6, check the stability of the lever, lever strength is an important guarantee for the impact of the shower room.
7, check the details of the department, such as doors and doors directly seams, wall connections and so on.
Editor's summary: How to install the shower room and how to use the shower room are introduced here. Hopefully it will help everyone. Want to learn more related knowledge can focus on this site information.
Shower room shower room brand shower room installation shower room how to install
Medical Surgical Face Mask,Anti Covid-19 Face Mask,Three-Ply Face Mask,Non Woven Medical Masks
Guangdong Jia Mei Biological Technology Co.Ltd , https://www.jaymeimask.com