How to reduce tire wear? Learn these tricks to extend the life of your car tires

The continuous increase in the cost of using cars has forced people to not miss any detail on saving money. Tires are actually a consumable that consumes a lot of money in the process of using the car. Four tires are worth thousands of dollars. If improper use leads to abnormal wear and tear, it is a huge blow to the owner's wallet! Coupled with the recent fluctuations in the international tire market, people are also anxious about the trend of tire prices. We can't control the price of the tires. Therefore, how to reduce the wear and tear of the tires and maximize the service life of the tires is the knowledge that the owners must master. The driving method of the car has a lot to do with tire wear. Good and skilled driving skills can effectively reduce tire wear, extend tire life and improve driving safety. Here are a few tips to reduce tire wear.

Air pressure to reach the standard

The driver must inflate the tires in accordance with the regulations of the car manufacturer. When the tire pressure is lower than the standard value, the wear of the tire shoulder increases sharply; when the tire pressure is higher than the standard value, the tire ground contact area decreases, the unit pressure increases, the tire tread middle wear increases, and the tire rigidity is increased. In order to increase the dynamic load on the wheel, it is easy to cause the carcass to burst.

No tread crack

Regularly check the surface of the tire for cracks, deformation and other defects. The groove of the tire gradually becomes shallow due to running wear. If it is smoothed, it will lose the effect of drainage and anti-skid. The performance of the car will be greatly reduced, and the seemingly small crack is a hidden danger of puncture at high speed. Also pay attention to clearing the pebbles in the grooves in time.

Parking floor

Avoid parking your vehicle on rough, sharp or sharp stones. Do not park your vehicle near or in contact with petroleum products, acids and other materials that affect rubber deterioration. The driver should not turn the steering wheel after parking, which will accelerate the wear of the tire.

Cooling water

Tires tend to overheat when driving for long periods of time in summer or at high speeds, while the air pressure is increased. At this time, it should be stopped to dissipate heat. It is strictly forbidden to depressurize or depressurize or splash water to prevent abnormal aging of the tread rubber.

Avoid sudden braking

Start too fast, avoid frequent use of brakes and emergency brakes to avoid tread wear due to tire and ground towing; proper control when cornering, overtaking, crossing, narrow roads, railway crossings, etc. Speed ​​and pay attention to road, pedestrian, vehicle dynamics, prepare for braking, reduce frequent braking, avoid emergency braking, thereby reducing tire wear; when facing broken glass or other foreign objects that cannot be avoided, slow down Do not brake suddenly, because the pressure is increased by the sudden braking, and glass fragments and foreign objects are more likely to get into the tire.

Choose a good road

When driving in the road maintenance construction area, the method of slow-pacing selection of the road surface is adopted to avoid the tire being subjected to excessive impact and even being stabbed or scratched. On the uneven road, the road surface should be selected to reduce the tire and the road surface. Hit to avoid damage to the parts and tires; second, slow down and avoid bumps and strong vibrations; through muddy areas, choose a solid, non-slip place to avoid tires from sag, vacillation in situ, and intense heat generation. Serious cuts and scratches on the tires and sidewalls.

Control speed

The turning of the vehicle should be appropriately decelerated according to the curved road conditions and the turning radius, so as to avoid the wear of the unilateral tire due to the inertia force and the centrifugal force; the downhill slope of the vehicle should be controlled according to the size, length and road condition of the slope. This can avoid or reduce the use of emergency braking to reduce tire wear; vehicles should stop and stop when they are on the road, and should develop a habit of safe taxiing.

Check the spare tire

In the maintenance and use of tires, don't forget the most important tire – the spare tire. The spare tires are factory-equipped, but they are often forgotten by the owner and lack maintenance. It is recommended that you check the spare tire regularly every three months and inflate it if necessary to avoid it being flat when you need it.

Focus on wear resistance

Most people don't know, in fact, wear resistance is a basic indicator of the tire. Unlike its size, load bearing and speed grade, the wear index is not identified on the shoulder of the tire, perhaps because of the wear index. It does not directly affect installation, or pose a direct threat to security, as other indicators above. However, the owner of the car may wish to go online or through some other means to understand the tire wear index, which should be a reference for you to choose a durable tire.

Musk Ketone a kind of artificial musk.used for the preparation of flavor.the aroma quality of musk xylene is elegant, is used as a fixative; modulation of cosmetics, soap flavor; also with methyl violet copper, cinnamic alcohol, benzyl salicylate and other spices to make the powder flavor.


573269960868382648


Ketone Musk

Ketone Musk,Saudi Arabia Musk,Free Sample Musk,25Kg Drum Musk

Gan Su Original Flavor Co.,ltd , https://www.muskxylol.nl