Home>Bearing knowledge>Selecting the key to smooth grease

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Tips for selecting smooth grease for bearings

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The selection of bearing smooth grease is directly related to the stability of the equipment; in order to better carry out the best condition of the bearing; it is necessary to think about the following aspects:
1. Anti-rust function It is necessary to apply anti-rust effect to the grease in the bearing; the anti-rust agent is the most insoluble in water. The grease should have excellent adhesion; and it can form an oil film on the steel surface.
2, mechanical stability of the oil will become soft during machining; lead to leakage. In normal work; grease will be smashed into the bearing from the bearing seat. If the mechanical stability of the grease is not working; during the work; the distribution of grease soap will occur Mechanical disintegration; the formation of grease is damaged; then the smoothing effect is lost.
3, oil seal oil seal is necessary to protect the bearing and smoothing agent from external pollution barrier; bearing work process; no matter whether debris or moisture can not enter the bearing; to prevent the formation of damage.
Proper device protection is an important factor in promoting the longest service life of bearings. Together; it is necessary to pay attention to the cleanliness of the bearings, the correctness of the bearing selection and the selection of appropriate devices and protections. Others; bearings need to avoid contamination And the pollution of moisture; and to ensure that the correct device and smooth. Therefore, the description of the bearing arrangement, the condition of the oil seal, the type of smoothing agent and the smooth cycle; even the special protection plays the same and important person.
4, mixed grease should never be mixed with incompatible oil; if it is mixed with two incompatible oils; generally its consistency will become soft; in the end may be due to the simple loss of grease to form bearing damage. If you do not know the original bearing Which kind of smooth grease is used; it is necessary to completely remove the old grease in the bearing table before adding new grease.
5. The classification of oils is mainly based on the difference between temperature and working conditions: oils can be classified according to their allowable working temperature; the consistency and smoothness of oils are affected by working temperature; bearings that operate at a certain temperature need to be selected. Grease with the correct consistency and outstanding smoothing effect at the same temperature. Grease is made at a different working temperature scale; roughly distinguishable from low temperature, medium temperature and high temperature grease. Together; one type of grease is called resistant Kneading or kneading and adding molybdenum disulfide; together; adding an increase agent to strengthen the strength of the smooth oil film.
6, the important factor in the selection of grease, if it is faulty to select the grease, then all measures to prevent the bearing is also in vain; pick a grease; its base oil viscosity at the working temperature is able to supply the smooth effect is very important; viscosity is the first to be temperature The effect; it decreases with the rise of temperature; when the temperature decreases, it rises. Therefore; it is necessary to know the viscosity of the base oil at the working temperature. Mechanical manufacturers generally specify the use of certain oils; but most of the specifications are smooth The scale of fat application is very wide.
The following are some important factors in the selection of smooth grease: mechanical varieties, bearing varieties and large. Also ぷ魑 龋ぷ鞲 龋ぷ鞲 汕榭觯俣 汕榭觯俣 ぷ髑榭觯蝗缯穸 ぷ髑榭觯蝗缯穸 ぷ髑榭觯蝗缯穸 ぷ髑榭觯蝗缯穸 ぷ髑榭觯蝗缯穸 ぷ髑榭觯蝗缯穸 ぷ髑榭觯蝗缯穸 ぷ髑榭觯蝗缯穸 ぷ髑榭觯蝗缯穸 ぷ髑榭觯蝗缯穸Blame

---

Recommend to friends comments close window

Bearing related knowledge

Discussion and analysis: Video coaxiality test bearing coaxiality detection using condensate pump thrust bearing temperature is too high, analysis and disposal equipment repair, bearing installation, heating, new method, bearing, description of damage, and attention to the operation characteristics of rolling bearings

This article links to http://
Please indicate the bearing network http://

Previous:Analysis of the environmental conditions necessary to replace the new FAG bearing Next:TIMKEN bearing life extension method

Commercial heat pumps are designed for offering hot water for commercial use, such as office, workshop, super market, school, etc. In order to achieve the required water temperature, large heat pump units apply Unique V style evaporator design is a big strong point for this unit. It increased the evaporator space in air flow direction, which results bigger effective air volume. It had been proved to be better efficiency by our testing. This design is also easier for the defrosting water to drain out. Scroll compressor is standard for this series.

Heat Pump For Commercial Use

Commercial Heat Pump,Electric Heat Pump,Commercial Air Source Heat Pump,Heat Pump For Commercial Use

Linuo Ritter International Co.,Ltd , https://www.lnrtsolarenergy.com