China's machine tool market information summary
Since the end of 2012, the import volume of metal processing machine tools has been continuously reduced, and the unit price of imports has continued to increase. This trend continued in 2013. The import volume decreased in the first seven months, but the unit price increased by 6.4%. From the situation in July, the import volume increased month-on-month, while the import price unit decreased. According to the statistics of the General Administration of Customs of China, in July 2013, China imported 7132 sets of metal processing machines, a sharp drop of 33.7% year-on-year; the import value was 869 million US dollars, a sharp drop of 31.6% year-on-year; the average unit price was $121,900.
In terms of imports, a total of 0.65 million machine tools were imported in April, down 22.7% year-on-year; the import value was US$970 million, down 3.1% year-on-year. From January to April, China's cumulative import of metal processing machine tools was 25,600 units, a year-on-year decrease of 19.3%. The cumulative import value was US$3.67 billion, down 12.1% year-on-year. In terms of exports, the export of metal processing machine tools reached 1.23 million units in April, up 105% year-on-year; the export value was US$210 million, down 0.9% year-on-year, and the value of single-unit exports fell sharply. The cumulative export value from January to April was 890 million US dollars, a year-on-year increase of 5.5%.
In May 2013, the export value of the machine tool industry was 3.740 billion, a year-on-year growth rate of 1.19%. From January to May, the export delivery value was 16.98 billion, with a cumulative year-on-year growth rate of 2.57%.
In May 2013, the export value of the machine tool industry was 3.740 billion, a year-on-year growth rate of 1.19%. From January to May, the export delivery value was 16.98 billion, with a cumulative year-on-year growth rate of 2.57%.
In May, the output of metal cutting tools was 67,852,100 pieces, a growth rate of 10.31%, a year-on-year growth rate of 24.79%, and a total of 3,075,564,200 pieces in January-May, with a cumulative year-on-year growth rate of 24.42%.
From January to June 2013, the total import and export volume of the machine tool industry was US$11.787 billion, down 11.44% year-on-year, accounting for 3.74% of the machinery industry. Among them, the negative growth rate of import and export of machine tool industry has expanded, and exports are faster than imports. The eastern coastal areas such as Jiangsu, Guangdong and Shanghai have always been the main areas for the import of CNC machine tools in China, and also the areas where export-oriented enterprises are relatively dense. The three places together account for more than half of the imports of CNC machine tools. However, in recent years, with the increase in investment and construction in the Midwest of China, the import of these regions has experienced a decline in volatility.
In recent years, China's central and western economy has shown rapid growth, characterized by large batches, concentrated sources of imports, and low prices for single units. Imported enterprises are mainly processing enterprises that serve the IT industry. It can be seen from this that China's export processing industry is shifting to the central and western regions.
In the first half of the year, the development speed of overseas investment in China's machine tool industry was declining. There are three main reasons for this. First, the national policy has changed. Foreign-invested enterprises have enjoyed the same treatment as nationals in terms of taxation and equipment imports, and have reduced some preferential policies. Second, the market sentiment in the mainland has declined, and the desire for foreign investment has declined. Third, domestic Manufacturing costs have risen markedly, and low labor dividends are gradually being compressed, which is consistent with the recent trend of some labor-intensive industries shifting to neighboring countries. Among the eleven products, metal processing machines have the largest deficit and the largest tool surplus. From January to June, the import and export deficit of the machine tool industry was 3.499 billion US dollars.
Micro tubule cluster pipe/tube
With HDPE (high density polyethylene) uPVC as the raw material, ext-ruder is extruded to make plastic molding production, the single hole wall intersect, a kind of cable sheath pipe of close melting boundary.Products are waterproof, moisture-proof, anti-aging, long service life, and good weatherability characteristic, at the same time, since it is a one-time molding integration porous protect casing, so the construction is convenient, increase the number of embedded holes, to improve the construction speed, greatly reduces the engineering unit of materials and construction cost.
The inner wall of this kind of pipe is smooth and can be used for optical cable, which can save working hours, its structure is reasonable, the use value is high, the life is long.It is mainly used for mobile,uni-com, net-com, broadcast and other communication cable sheath.
Application:
It is mainly used for communication cable, telecommunication cable network, length communication line and cable TV broadcast transmission network.It has the advantages of being flexible and flexible, less laying, convenient construction, safe and reliable, and low cost.
Features:
1. Good corrosion resistance, good electrical insulation, at least 50 years.
2. The porous partition is clear, the thread is easy and convenient.
3. The construction is convenient and fast and the construction cost is low.
4. Tight arrangement of holes to improve the utilization ratio of communication holes.
5. Product integration structure, high strength, long service life.
HDPE/UPVC Multi Hole Plastic Pipe
Plastic Pipe With Multiaperture Profile,New Material Pipe,Multiaperture Profile Plastic Pipe
ZHEJIANG BOYA COMTECH CO.,LTD , http://www.zjbytx.com