Do you know the installation and installation of the sink?
The decoration thing is not sloppy, stealing a little lazy, a little more will lead to a bloody lesson. For the more important decoration area of ​​the bathroom decoration, it is absolutely important to pay attention to it, not only will it leave regrets but also bring trouble to the future life. For the details of the bathroom decoration, what should be noted, Xiaobian compiled the following content, everyone take a look!
1. Washing basin installation and construction essentials:
(1) The washing basin product should be flat and non-destructive. The drain plug should have an overflow hole of not less than 8 mm in diameter.
(2) When the drain plug and the sink are connected, the overflow plug of the drain plug should be aligned with the overflow hole of the sink to ensure the smooth flow of the overflow. After the insert, the upper end of the drain plug should be lower than the bottom of the wash basin.
(3) The bracket fixing bolts can be galvanized bolts or galvanized metal expansion bolts of not less than 6mm (if the wall is porous brick, expansion bolts are strictly prohibited).
(4) After the washing basin is connected with the drain pipe, it should be firm and compact, and easy to disassemble. The joint should not be open. Silicone paste caulking is applied to the wash basin and wall contact.
(5) If the wash basin drain trap and faucet are plating products, the plating shall not be damaged during installation.
2. The installation essentials of the bathtub:
(1) When installing the skirting tub, the bottom of the skirt should be close to the ground. The floor should be reserved for 250~300mm holes in the drainage area to facilitate drainage installation. The inspection hole is installed in the wall of the bathtub drainage end.
(2) Other types of bathtubs can determine the height of the upper surface of the bathtub according to relevant standards or user requirements. Then install the tub after laying two brick foundations. For example, if the side wall of the bathtub is built, the inspection hole should be set at the drain of the bathtub or the inspection hole should be opened on the wall of the drainage end.
(3) The height of all kinds of bathtub cold, hot water taps or mixing faucets should be higher than the plane above the bathtub 150mm. The chrome plating should not be damaged during installation. The chrome cover should be in close contact with the wall.
(4) The height of the fixed shower and hose shower can be installed according to relevant standards or according to user requirements.
(5) The upper surface of the bathtub installation must be leveled with a horizontal ruler and must not be inclined. Apply a sealing paste to the side of the upper side of the bathtub and the wall.
(6) The connection between the bathtub drain and the drain pipe should be firm and compact, and it is easy to disassemble, and the joint should not be open.
Shower Accessories
Shower accessories include parts like shower head, Hand Shower, Shower Holder, Top Shower , shower elbow, sliding shower bar, hose, cartridge, handle, spout, stainless steel shower hose. You can buy these shower accessories to DIY your preference shower faucets for different style bathroom. Or replace any parts of your customer`s Shower Mixer.
Shower Accessories
Shower Accessories,Bathroom Accessories Set,Bathroom Fittings,Bathroom Accessories
SHENZHEN KING OF SUN INDUSTRY CO.,LTD , https://www.handyfaucet.com