Home>Bearing knowledge>What is the primary problem of sliding bearings?

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

What is the primary problem with sliding bearings?

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

When the sliding bearing is in operation, the contact between the journal and the bearing bush will collide; it will cause external heat and wear and even “bite”; therefore, when drawing the bearing; the bearing material should be made of sliding bearing with good friction reducing property; And choose the appropriate supply method; improve the layout of the bearing to achieve thick film and so on.
1. Corrugated surface corrosion: Spectral analysis found that the concentration of non-ferrous metal elements is abnormal. The sub-micron-scale wear particles of many non-ferrous metal components are present in the iron spectrum, and the smooth oil moisture overruns and acid value overruns.
2, the outer surface corrosion of the journal: spectral analysis found that the concentration of iron is abnormal; there are many sub-micron particles of iron in the iron spectrum; smooth oil moisture overrun or acid value overrun.
3, the external appearance of the journal: there are iron-based cutting abrasive black oxide particles in the iron spectrum; metal appearance has tempering color.
4, fretting wear on the tile back: spectral analysis found that the iron concentration is abnormal; there are many iron sub-micron wear particles in the iron spectrum; smooth oil moisture and acid value is abnormal.
5, bearing external strain: found in the iron spectrum cutting abrasive; abrasive particles are non-ferrous metals.
6. Wafer surface shedding: There are many large-scale fatigue-shedding alloy wear particles and layered abrasive grains found in the iron spectrum.
7. Bearing burnt tile: There are many large-scale alloy abrasive grains and black metal oxides in the iron spectrum.

---

Recommend to friends comments close window

Bearing related knowledge

How to choose bearings and the precautions in use High-speed bearings are featured and selected The common method of distinguishing bearing quality from the koyo bearing cracking edge by the skill requirement of cracking failure to improve the sliding bearing scraping

This article links to http://
Please indicate the bearing network http://

Previous:The use of plasma nitriding skills in crankshaft production (1)
Next: Analysis and sweeping of abnormal noise of crankshaft bearings of Alto mini car

Hardboard is often taken from deciduous, fine - leaved trees  and  divided into two kinds, one is miscellaneous wood, such as beech, elm, oak, one is rosewood, such as rosewood, pear, acerbity branch, chicken wing wood, etc.In the case of oak, it is hard, stability is stronger, grain is clearer, the furniture that makes is durable, very simple and fashionable.The furniture that make is very high-grade, suit to make Europe type furniture especially.Oak is coarse, colour and lustre is elegant, wear-resisting, a lot of adornment, furniture, floor and so on material, choose to use oak to make.Practicality is more extensive, water absorption is very strong, also resist corrosion, the real wood furniture quality that makes with it is very good. Luli Group Co.,Ltd  has many years of production experience and produces many high quality hardboard but  low price.

The details of hardboard  

1.Size:1220*2440MM

2.Thickness:2-6MM

3.Density:900-1000KG/M3

Hardboard

Decorative Hardboard Sheet,Melamine Hardboard,Plain Hardboard,Textured Hardboard

Luli Group Co.,Ltd. , https://www.plywoods.nl